Piston type filling machine is a kind of filling machine for high concentration fluid. It uses the three-way principle of cylinder driving a piston and rotary valve to extract and pump out high concentration material, and uses magnetic spring switch to control the stroke of cylinder to adjust the filling volume. 1. Applicable to: food, medicine, daily chemical, pesticide and other industries 2. This equipment has the characteristics of compact and beautiful design, easy operation and high accuracy. 3. This machine adopts a special three-way filling valve to realize the filling of materials through the reciprocating motion of the cylinder. It is an ideal alternative equipment for manual operation. 4. The material contact parts are made of 316L stainless steel, meeting the GMP requirements. For the strong corrosive liquid, the material contact part is made of polytetrafluoroethylene to ensure the long-term stable operation of the equipment. 5. The filling quantity and filling speed can be adjusted arbitrarily, and the filling precision is high. 6. Filling plug adopts anti dripping, anti drawing and lifting filling device. Installation and debugging 1. After unpacking, the machine is installed according to the instructions, and the compressed air source is connected. The pressure of the compressed air source is 0.6MPa. If the compressed air main pipe is connected, the valve should be installed first. 2. Open the right door, screw out the oil level of the oil atomizer, and add clean special oil or sewing machine oil. Note: do not use air pressure when adding oil, and the oil volume should be about 8 minutes full. 3. Connect the air source to check whether there is air leakage on each sealing surface, adjust the air pressure to 0.3 ~ 0.4MPa, adjust the oil intake, generally spray a drop of oil after several actions, and reg

According to the sum of the output value of pneumatic tool manufacturing enterprises above the National Bureau of Statistics (with an annual output value of more than 5 million yuan) and the investigation and analysis of the market concentration of these large enterprises, combined with the annual customs import and export data, and based on the long-term monitoring and research experience of China economic vision research, as well as the evidence of relevant experts in the industry, Our estimation of the market size and growth rate of China's pneumatic tool industry is shown in the figure below. Global economic integration makes the development of any industry affected by diversification and complexity. There are many factors affecting the scale of China's pneumatic tools market, and the most important of them are two factors, one is the change of downstream market demand, the other is the change of import and export situation. The change of downstream market demand will directly affect the market demand for pneumatic tools. For example, if the decoration industry grows at a high speed, the number of enterprises and employees engaged in decoration will increase, and a large number of pneumatic tools for decoration will need to be purchased. The development of decoration industry is inseparable from the healthy development of the real estate industry, The Chinese government is controlling the crazy situation of the real estate industry, and a series of policies will cause a sharp reduction in market turnover. According to the survey and analysis report on the market prospect of China's pneumatic tools released by Zhongjing vision, in the long run, the background of China's urbanization process will not change, so the residence of people entering the city must be solved. This demand will inevitably drive the development of the decoration industry, and also drive the market demand of the pneumatic tools for decoration. For another examp