Piston type filling machine

Piston type filling machine is a kind of filling machine for high concentration fluid. It uses the three-way principle of cylinder driving a piston and rotary valve to extract and pump out high concentration material, and uses magnetic spring switch to control the stroke of cylinder to adjust the filling volume.

1. Applicable to: food, medicine, daily chemical, pesticide and other industries

2. This equipment has the characteristics of compact and beautiful design, easy operation and high accuracy.

3. This machine adopts a special three-way filling valve to realize the filling of materials through the reciprocating motion of the cylinder. It is an ideal alternative equipment for manual operation.

4. The material contact parts are made of 316L stainless steel, meeting the GMP requirements. For the strong corrosive liquid, the material contact part is made of polytetrafluoroethylene to ensure the long-term stable operation of the equipment.

5. The filling quantity and filling speed can be adjusted arbitrarily, and the filling precision is high.

6. Filling plug adopts anti dripping, anti drawing and lifting filling device.

Installation and debugging

1. After unpacking, the machine is installed according to the instructions, and the compressed air source is connected. The pressure of the compressed air source is 0.6MPa. If the compressed air main pipe is connected, the valve should be installed first.

2. Open the right door, screw out the oil level of the oil atomizer, and add clean special oil or sewing machine oil. Note: do not use air pressure when adding oil, and the oil volume should be about 8 minutes full.

3. Connect the air source to check whether there is air leakage on each sealing surface, adjust the air pressure to 0.3 ~ 0.4MPa, adjust the oil intake, generally spray a drop of oil after several actions, and regularly check the oil injection.

4. Filling volume adjustment: first rotate the filling volume adjustment handwheel, observe the scale of the indicator window to achieve the required filling volume, at the same time, adjust the suction and discharge speed to achieve satisfactory filling effect, measure the filling volume with dosage, and finally correct the filling volume.